Does the network cable length conform specification for the type of network serviced?.

If it is, please contact Lexmark Technical Support.Īdvanced users should answer the following questions:

Confirm that the printer is not displaying a 97x or 54 Std.

If connected to the network using the 802.11b/g/n wireless network adapter, verify that other wireless clients are communicating on the same network or SSID.

If not, change the network cable or try a different access port on the switch, router, wall, or hub.

Confirm that the link LED is illuminated.

Confirm that the network cable connector is not damaged.

Confirm that the network cable is not damaged.

Make sure that the ethernet cable is fully seated into the RJ45 ethernet port on the back of the printer.

It is recommended that you first perform the 'preliminary tests'.

*Printers and MFPs equipped with Wireless ( IEEE 802.11b/g/n) option cards.

Other factors that can prevent network communication:.

Telnet: An additional communication test can help identify TCP/IP port closure in the 9000 range.

Network Settings Page - Status of Connected or Not Connected.Index of troubleshooting subjects covered here You require additional assistance with the Topics in this articleĬonsider other help options, including contacting Lexmark Technical Support. See the following Network Communication Diagnosis topics.Ĭlick here for an article that describes driver, port, and port-related topics.

You are not sure that the printer is communicating over the network It is important to differentiate between communication failure and print failure. any other communication-related error message or.

When attempting to print, a Communication Not Available message is received or.One of the following network-related situations is observed: Support article for Lexmark T652 Markvision Enterprise: Preliminary wired or wireless network troubleshooting for printer not communicating on the network Issue description

Lexmark wireless setup utility mac